Miter Saw Repair – Replacing the Left Fence (DeWALT Part # N081824SV)

Your miter saw’s fence is made up of three
main components, the lower fence, and two upper fence extensions. The extinctions provide additional support
for tall work pieces such as crown or baseboard molding. The extinctions can also be adjusted side-to-side
so that the blade can be tilted for a bevel cut. Most problems with the extension fences are
the result of accidental damage such as hitting them with a long board or something falling
on the saw.Replacing the extension fences is a repair that you can do yourself, and
I’m going to show you how. Hi. I’m Mark Sodja. Do it yourself repairs like these are easier
than you might think. From lawn machines to cordless drills, kitchen
mixers, outdoor grills, our how to videos walk you through each repair from start to
finish, so doing it yourself means never having to do it alone. Let’s get started .Before making any repairs
to your miter saw or any other power tool, make sure that you have it unplugged. The left fence is secured to the saw with
a knob. I will loosen the knob and the fence can simply
slide off the saw. Now, install the new left fence. It can simply slide on the lower fence. Then you secure it with the knob. That’s all it takes to replace the left fence
on your DeWALT miter saw. Be sure to check back often for new videos
and expert advice. If you found this video helpful, give us a
thumbs up and leave a comment.

Posts Tagged with…

Reader Comments

Write a Comment

Your email address will not be published. Required fields are marked *